NT600 High Voltage Modular Cable Tester

High flexibility, highly expandable, High Voltage Test

Description

NT 600 Modular Cable Tester – high flexibility, highly expandable, High Voltage test

  • Easy operation via PC with comprehensive control software via “NT Control”
  • Extensive result reporting to file, to printer or via database connection*
  • Extensive GUI display possibilities and tools for fault location in the unit under test [UUT]
  • Up to 1024 test points in the base unit, expandable to max. 5,120 test points
  • Continuity test, short-circuit test and component test
    • Optional: 
    • High current test up to 2 amps dc
    • High voltage test 1500 V dc
    • Dielectric strength test (DWV) up to 1050 V ac / 1500 V dc
  • Remote maintenance

The NT 600 is a powerful, entry-level high voltage tester that is highly flexible allowing expansion for future capability or when budget allows.

  • Low start-up investment costs as well as low ongoing cost
  • Easily expandable*:
    • Additional measurement electronics (AC/DC)
    • LCR measurement bridge
    • Test point expansion via test point units (TPU’s)
    • Four-wire measurement from 100 µOhm upwards
    • Insulation tests up to 10 G Ohm as standard
  • Automatic, harness test table support

The high reliability of the Adaptronic test and adapter systems, combines with CTS’ fast customer oriented response with over 30 years of experience makes a convincing contribution to the quality assurance of your products.

NT 600 Options

Measurement electronics expansion; to the base equipment specification, MT20 up to 25 VDC / max. 25 mA

  • Measurement electronics:
    • MT40-40 – up to 40 VDC / max. 100 mA
    • MT40-250 – up to 250 VDC / max. 10 mA
    • MT1500DC – up to 1500 VDC / max. 2 A
    • High voltage insulation test / high current continuity test (optional up to 40 VDC / 10 A pulsed)
    • MT2000
    • up to 1050 VAC
    • up to 1500 VDC
  • Dielectric strength test, max 3 mA or 6 mA
  • Internal AC measurement bridge MT_LCR for the test of inductance, capacitance and resistance.
  • Voltage measurement device MT_EXT for voltage measurement up to 700 VDC & 500v AC (max. 400 Hz)
  • Four-wire (Kelvin) measurement for measuring low resistance from 1 m Ohm or 100 µOhm

Function test

  • Stimulus cards
  • Stimulus sources
  • Test and programming of single-wire devices
  • Total integration of camera systems for visual tests
  • ProfiNet, LIN-, CAN-, Mod-Bus TCP, other bus systems on request

Elaborate number of interfaces

  • Digital inputs and outputs 24 V
  • Interface for test point units (standard)
  • Extern Interface (standard)
  • Safety loop (standard) etc

NT Control test and programming software

  • Graphic user interface with clear test display
    • Operating buttons, test status, statistics
    • In the error case display as error list or single error
  • Editors for net lists, link lists, insulation point lists (prim lists) and component lists, function test editor
  • Easy realisation of special test procedures
  • Comfortable multimeter function

Open Wire Probe

  • Intelligent pin number probe
  • Test point display
  • Status display
  • Operation modes automatic and manual

Operating and display options

  • Foot switch option for test start
  • Warning lamp for high voltage tests
  • Test result lamp – Pass/Fail

Temperature and humidity logging

  • Combined temperature and humidity sensor – Interface at the NT 600
  • Temperature and humidity available in NT Control

Comprehensive possibilities of interface boards and adapter cables

  • Interface boards for the adaption of the adaptronic interface to customer’s existing adapter cable connector systems
  • Adapter cables with adaptronic standard interfaces, open cable ends for the adaption by the client or application specific special adapter cables

Test point units

  • Up to 1024 test points each unit
  • Max. 4 test point units with max. 4096 test points can be operated from a NT 600 (with max. 1024 test points)
  • Positioning of the base unit and the test point units directly side by side or one upon the other

Additional services

  • Training for programming and testing with NT Control and NT 600
  • Calibration service
  • Application specific assistance

Support / Service / Calibration

  • Programming / Fixturing services available
  • Calibration service – both on-site and back to base at CTS
  • Application specific assistance