ITECH: IT8512H Programmable DC Electronic Load

800V/5A/300W DC Electronic load

Categories: , SKU: IT00006

Description

Product Introduction

IT8500+series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications.They can be offered as multiple solutions according to customer’s design and testing requirements.The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. IT8500+ series DC loads are a versatile instrument for static and dynamic testing of power supplies,batteries,DC – DC converters,battery chargers,provides user the best testing solution.

Product Model List

Model Voltage Current Power Resolving Accuracy Interface Size
IT8511A+ 150V 30A 150W 0.1mV/1mA (0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8511B+ 500V 10A

150W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8512A+ 150V 30A 300W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8512B+ 500V 15A 300W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485/td>

½ 2U IT8512C+ 120V 60A 300W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8512H+ 800V 5A 300W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8513A+ 150V 60A 400W 0.1mV/1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485 ½ 2U IT8513B+ 500V 30A 600W 1mV/1mA 0.02%+0.025 %FS/0.1%+0.1%FS RS232/USB/RS485 ½ 2U IT8513C+ 120V 120A 600W 0.1mV/1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Optional RS232/USB/RS485

½ 2U IT8514B+ 500V 60A 1500W 0.1mV/1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Built-in RS232/USB 2U IT8514C+ 120V 240A 1500W 1mV/0.1mA ±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS) Built-in RS232/USB 2U IT8516C+ 120V 240A 3000W 0.1mV/1mA ±(0.025%+0.025%FS)/ ±(0.1%+0.1%FS) Built-in RS232/USB 4U

Features

• Four operating modes: CV,CC,CR,CP
• Battery test function, automatic test function, OPP test, OCP test function and CR-LED function.
• Dynamic mode up to 10KHz
• Voltage measurement resolution up to 0.1mV / 0.1mA
• Remote sense
• Short circuit function
• Current monitoring function
• Power-off memory function
• 100 groups memory capacity
• Optional USB / RS232 / RS485 interface
* IT8514B+, IT8514C+ and IT8516C+ have built-in RS232 and USB interfaces.

Functions and Advantages

Dynamic test function
The dynamic test operation allows the electronic load to be switched between the two setting parameters according to the setting rules. This function is used to test the dynamic characteristics of the power supply.
• Continuous mode: Under continuous mode, When the dynamic test operation is enabled, load will be continuously switched between the A value and the B value .
• Pulse mode: Under pulse mode, when the dynamic test operation is enabled, each receive a trigger signal, the load will switch to the B value, after maintaining the B pulse width time, switch back to the A value.
• Toggle mode: In the trigger mode, when the dynamic test operation is enabled, each time a trigger signal is received, the load is switched between the A value and the B value.

Battery discharge test function
IT8500 + series electronic load can use constant current mode for battery discharge test. After the discharge test mode is selected, the test mode termination condition “switch off voltage value”, “switch off capacity value” and “discharge time” can be set. When any of the three conditions is satisfied, the discharge is stopped and the electronic load is automatically switched is OFF state. Users can observe the battery voltage, time and battery discharge capacity during the test process.

Options & Accessories

CD (accessory) With user manual etc.
AC power cord (accessory)
IT-E121 (Optional) RS232 optical isolation commum.
IT-E122 (Optional) USB optical isolation commun.
IT-E123 (Optional) RS485 optical isolation commun.
IT-254 (Optional) Cooperate with IT8500+ to comp.
IT-E151A (Optional) 19” Rack mount kit
IT-E151 (Optional) 19” Rack mount kit
IT-E30110-AB (Optional) 10A/1m/Alligator clip – Banana plug
IT-E30110-BY (Optional) 10A/1m/Banana plug – Y terminals
IT-E30312-YY (Optional) 30A/1.2m/Y terminal, a pair
IT-E30320-YY (Optional) 30A/2m/Y terminal, a pair
IT-E30615-OO (Optional) 60A/1.5m/round terminal, a pair
IT-E31220-OO (Optional) 120A/2m/round terminal, a pair
IT-E31220-OO (Optional) 120A/2m/round terminal, a pair
IT-E32420-OO (Optional) 240A/2m/round terminal, a pair
IT-E32410-OO (Optional) 240A/1m/round terminal, a pair
IT-E33620-OO (Optional) 360A/2m/round terminal, a pair

Additional information

AC / DC

Manufacturer

Product Code

Output Channels

Voltage

Power

Current

Downloads

View Brochure

View Manual